Clicky

CARTRIDGE SYSTEMS

CiC FOIL PACK

CO-AXIAL

SIDE BY SIDE

UNIVERSAL

PEELER

CiC FOIL PACK SYSTEM

 

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990's, is one of the most popular dispensing systems in the world. It allows us to fill your two-component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Available in:

150ml, 170ml, 300ml and 850ml volumes.

 

Applicator:

May be used with standard mastic guns.

C-CN (CO-AXIAL) CARTRIDGES

 

The C-CN cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

 

 

Available in:

150ml, 330ml, 380ml and 410ml volumes.

 

Applicator:

150ml - standard mastic gun. Dedicated dispensing tool is required for the 330ml, 380ml & 410ml cartridge sizes.

S-SN (SIDE-BY-SIDE) CARTRIDGES

 

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

 

 

Available in:

345ml, 400ml, 585ml, 600ml, 825ml, 900ml, 1125ml and 1500ml volumes.

 

Applicator:

All cartridge sizes require dedicated dispensing tools.

UVL (SINGLE-PISTON) CARTRIDGE

 

The UVL cartridge is a two-component cartridge that is extruded with a medium to high power single component applicator tools. The “B” component is filled in a chamber behind the “A” Component, and separated from it by a fixed seal. Both the front and the rear compartment pistons move in tandem to empty to two halves of the cartridge.

 

 

Available in:

250ml volume (1:1 ratio) or 175ml volume (2:1 ratio).

Applicator:

Requires a good quality, single-piston mastic gun.

PLR (SINGLE-PISTON) CARTRIDGE

 

The PLR cartridge is a 280ml cartridge available in 10:1 ratio. Although co-axial in design the PLR can still be used in a single component applicator. This is made possible by a device positioned behind the piston of the cartridge, which cuts and separates the centre tube to provide a clear path for the applicator gun plunger.

 

 

Available in:

280ml volume (10:1 ratio).

Applicator:

Requires a good quality, single-piston mastic gun.

AVAILABLE PACKAGING TYPE AND VOLUME COMBINATIONS

2K Polymer Systems Limited, Venture Crescent,

Alfreton, Derbyshire.

DE55 7RA,

United Kingdom

> T: +44 (0) 1773 54 0440

> F: +44 (0) 1773 60 7638

> E: info@2kps.net

> Enquiry form

Copyright 2015