Clicky

EGP

EGP is a three pack high flow epoxy grout, with excellent low temperature curing characteristics, making it suitable for underplate grouting applications such as crane rails, machine base plates, bridge bearing pads and stanchion bases. The properties of EGP are achieved by blending modified epoxy resins to form a base component, which is activated by a formulated amine hardener. The filler component is a blend of limestone and silica sands.

The mixed material has high flow properties, allowing it to be either poured under gravity or pumped into place.

 

 

EGM

EGM is a three pack epoxy mortar. Its high strength and non-shrink characteristics make it ideally suited for filling of potholes, repairing spalled steps, bedding kerbs, and pre-forming machine plinths and bearing pads. The properties of EGM are achieved by blending modified epoxy resins to form a base component, which is activated by a formulated amine hardener. The inert filler component is a blend of graded silica sands and limestone.

 

 

EGI

EGI is a low viscosity epoxy resin specifically designed for the injection of cracks generally from 0.1mm to 10mm wide. It is a high performance material which gives an excellent bond to concrete, brickwork, stonework etc., and therefore permanently seals and structurally bonds such substrates.

 

 

EGT

EGT is a two component low viscosity but thixotropic epoxy resin specifically designed for the injection into cracked substrates, generally from 0.5mm to 20mm. The thixotropy of the resin ensures that in most instances the injection resin will not drain away from the injected area, but is sufficiently low in viscosity to be injected into narrow cracks.

EGT is a high performance material which gives an excellent bond to concrete, brickwork, stone etc., and therefore permanently seals and structurally bonds such substrates.

 

 

 

 

EP SCREED

EP Screed is a high performance impermeable composition specifically designed to give resistance to impact and abrasion in chemically aggressive environments. It is easy to apply and cures to provide a jointless, easily cleaned surface, which has a degree of slip resistance.

EP Screed consists of a blend of a low viscosity epoxy binder with a silica aggregate of optimum grading. The screed can be applied at 3mm thickness to vertical surfaces.

 

 

 

 

 

 

GROUTS & MORTARS

EPOXY-BASED GROUTS

MANUFACTURERS OF HIGH PERFORMANCE TWO COMPONENT RESIN SYSTEMS

Downloads

Home

Contact Us

About 2K

Packaging Solutions

PGV

Selfix PGV is a free flow polyester grout, specifically designed and developed for anchoring bolts and dowels into vertically downward holes into rock, concrete, brickwork and masonry. Typical applications are the permanent fixing of starter bars and dowels, foundation bolts, ground anchors, base plates for building systems, and rail and crane tracks. PGV is a two pack system consisting of a liquid polyester resin and a filler component containing graded silica sands and an activator.

 

 

POLYESTER-BASED GROUTS

2K Polymer Systems Limited, Venture Crescent,

Alfreton, Derbyshire.

DE55 7RA,

United Kingdom

> T: +44 (0) 1773 54 0440

> F: +44 (0) 1773 60 7638

> E: info@2kps.net

> Enquiry form

Copyright 2015