EASF
EASF offers outstanding performance in concrete, masonry, and other substrates. It is ideally suited for high load/heavy duty structural anchoring applications of studs, threaded bars, starter bars and dowels.
Being free of styrene, our EASF formulation has a very low odour and is well suited for use indoors and in confined spaces. It has a very low VOC content.
EASF has undergone extensive testing. It is CE Marked and has been accredited with ETA Assessments for use with stainless and galvanized steel anchors (Option 7 ETA), and for post-installed rebar connections (ETA according to TR023) and for masonry units (ETA according to ETAG029). EASF is the perfect solution for all your heavy-duty applications in uncracked concrete. It has also been fire tested and has received fire resistance classification F120 (for use with threaded bars) & F240 (for use with rebars). For those operating in markets where American building codes are recognized, EASF can offer Evaluation Service Report from IAPMO.
EASF is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side) and PLR cartridges.
Approvals
- ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
- ETA according to EAD 330087-00-0601 (TR023: Rebar Connections)
- ETA ETAG029
- IAPMO according to AC308
- Fire Resistance report F240 (post installed rebar connections)
- A+ French VOC (Emissions Class)
- NSF/ANSI 61 (Potable Water Contact)
Features
- Approved in concrete for threaded bars & reinforcing bars
- Approved in masonry for threaded bars and sockets
- Fire tested
- Anchors may be placed close to free edges
- Non-Sag formulation, ideal for overhead applications
- Available in co-axial cartridges (380; 400; 410ml), side by side cartridges (345; 360; 825ml), PLR cartridges (280ml)
- Ratio of 10:1
- Reduced edges and spacing distance values in case of concrete splitting failure mode, allowing anchoring in critical cases.
- Suitable for dry & wet holes
- Variable embedment depths
- Solvent free
- Smell free
Typical Applications
- Structural applications
- Reinforcing & starter bars
- Suspended ventilation systems
- Safety barriers
- Machinery & heavy machinery
- Rolling cranes
- Structural steel to concrete applications
Cartridge Systems
EASF is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.
CIC 300ml
Size selected: 300ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Co-Axial 380ml
Size selected: 380ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.
Co-Axial 410ml
Size selected: 410ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.
CIC 150ml
Size selected: 150ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 170ml
Size selected: 170ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 550ml
Size selected: 550ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 850ml
Size selected: 850ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Co-Axial 150ml
Size selected: 150ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
150ml - standard mastic gun.
Side-By-Side 825ml
Size selected: 825ml
The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.
Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml
Applicator:
825ml cartridge sizes require dedicated dispensing tools.
Side-By-Side 345ml
Size selected: 345ml
The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.
Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml
Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.
Suggested Accessories
Applicator Dispenser
Hybrid Hole Cleaning Brushes
Perforated Sleeves
Mixing Nozzles
Contact Us
Interested in our products and service? Click through to our contact form and one of our team will be in touch shortly.
Contact Us