EX3 Pure Epoxy Chemical Anchoring

EX3 is a high-performance two-component 3:1 ratio pure epoxy bonded anchoring system for use in cracked and uncracked concrete under normal as well as very demanding seismic conditions (seismic categories C1 & C2). Designed for starter bar and post installed rebar connection applications, EX3 High-Performance Pure Epoxy offers a very high load-bearing capacity. The system can be installed in percussive and diamond drilled dry, wet or flooded holes.

This 100% epoxy resin has been formulated with no Phenol, N-Methyl Pyrrolidone, Bisphenol A and Phtalates or VOCs. It exhibits minimal shrinkage, which makes it ideal for use with oversized holes, while extended gel time allows convenient use in deep holes and high ambient temperatures.

EX3 High-Performance Pure Epoxy has been extensively tested at leading test facilities and has a broad range of approvals, including ETA option 1 with best C1 & C2 seismic, ETA According to TR023, LEED tested for VOC, WRAS (potable water) approval.

EX3 High-Performance Pure Epoxy is available in 3:1 ratio 385ml, 585ml S-CN (side-by-side) cartridges.

Approvals

ETA according to EAD 33049-00-0601 (Option 1: Cracked & Uncracked Concrete)
Seismic C1 & C2
ETA according to EAD 330087-00-0601 (TR023: Rebar Connections)
100 years working life
Fire Resistance report F240 (post installed rebar connections)
ICC-ES According to AC308 (Pending)
A+ French VOC (Emissions Class)
LEED Tested
WRAS Material Approval (Potable Water Contact)

Approval Information

Features

Installations in dry, wet and flooded holes even in cracked concrete without reduction in the performance. Gel and cure times remain unchanged in damp or flooded holes
Extremely high load capacity
Remarkable seismic resistance
Overhead applications possible
Fixings close to free edges, stress free anchoring system
EX3 is available in pink/red or grey mixed colour
Excellent fire resistance F240 for post-installed rebar connections
Available in side-by-side cartridges (385ml / 585ml)
Mixing ratio of 3:1
Extended gel/open time

Typical Applications

Structural applications in cracked and non-cracked concrete, applications in seismic zones (C1 & C2)
Crash Barriers
Structural Steel
Façades
Post-installed rebar connections
Starter bar applications

Cartridge Systems

EX3 is available in 3:1 ratio S-CN (side-by-side) cartridges.

Side-By-Side 385ml Read more

Side-By-Side 585ml Read more

Side-By-Side 385ml

Size selected: 385ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
The 385ml cartridge sizes require dedicated dispensing tools.

Back